Use of cable

for transmitting of digital and analog signals for all ICT network applications at frequencies up to 600/1000/1200 resp. 1500 MHz. Main use in/on buildings with high terminal density, such as in office, administration, research & development buildings in the tertiary sector. Patch cables are designed for cabling in the workplace area for device connection or as switchboard cables in patch panels.

Special features

  • suits to the requirements of: EN 50173, ISO/ IEC11801, TIA / EIA 568, TSB36, EN 50288, IEC61156-5
  • for use in LANs like IEEE 802.3: 10/100/1000 Base-T, 10GBase-T; IEE 802.5: FDDI, ISDN, ATM; cable sharing; Multimedia
  • suitable for transfer of Power over Ethernet (PoE) / PoE +
  • LSZH: halogen-free, flame retardant, low smoke density (LowSmokeZeroHalogen)
  • PE: UV-resistant, for outdoor use & direct burial; (L)PE  add. water proof
  • Note: S/FTP = STP/S*                *old description

Remarks

  • conform to RoHS // conform to 2014/35/EU-Guideline ("Low-Voltage Directive") CE
  • acc. to standards ISO/IEC 11801 resp. EN 50173 the cable length should not exceed a length of 100 m (90 m cable duct + 10 m workplace) in tertiary area (horizontal area, floor)
  • further types and special types upon request
Conductor material: Bare copper
Conductor class: Single core
Core insulation: SFS-PE
Core identification: Whbu-bu, whog-og, whgn-gn, whbn-bn (resp. wh-bu, wh-og, wh-gn, wh-bn - at FTP types)
Stranding: Cores twisted to pair
Shield: S/FTP: copper braid tinned as overall shield and plastic clad aluminium foil as pair shield
Outer sheath: Halogenfree special compound
Sheath colour: PE: black; LSZH-Patch: grey; LSZH 1000: orange, LSZH 1200…1500: yellow
Loop resistance: AWG22: max. 12 Ω/100 m; AWG23: max. 15 Ω/100 m; AWG26: max. 29 Ω/100 m
Capacity: Nom. 45 nF/km
Characteristic impedance: 100 Ω ± 15% at 100 MHz
Min. bending radius fixed: 4 x d; PE: 5 x d
Min. bending radius moved: 8 x d; PE: 10 x d
Operat. temp. fixed min/max: -20 °C / + 60 °C; PE: - 40°C / + 70°C
Operat. temp. moved min/max: 0° C / + 50 °C; PE: -15°C / + 50°C (during installation)
Halogen free: Acc. to IEC 60754-2
Smoke density: Acc. to IEC 61034
Corrodibility: LSZH: acc. to EN 50267-2-2
Burning behavior: LSZH: flame-retardant and self-extingushing acc. to IEC 60332-1-2 and IEC 60332-3-24
Standard: EN 50173, ISO/IEC 11801, TIA/EIA 568, TSB36, EN 50288, IEC 61156-5, PoE: IEEE 802.3af and 802.3at for AWG23 & AWG22

Table of items

Product No.
Dimension
[n x mm²]
Outer-Ø
[mm]
Cu-Index
[kg/km]
Weight
[kg/1.000]
Sheath colour
Variant
2002484 4 X 2 X AWG 26/7 6,2 22,0 41,0 grey V1: Cat.7 - 600: LSZH - Patchkabel / patch cable
2007207 4 X 2 X AWG 23/1 7,6 34,0 60,0 orange V2: Cat.7A - 1000: LSZH - für feste Verlegungl / fixed installation
2001479 2 X (4 X 2 X AWG 23/1) 7,6 X 15,2 68,0 120,0 orange V2: Cat.7A - 1000: LSZH - für feste Verlegungl / fixed installation
2002432 4 X 2 X AWG 23/1 9,9 34,0 102,0 black V3: Cat.7A - 1000: PE - direkte Erdverlegung / direct burial
2003458 4 X 2 X AWG 23/1 9,5 34,0 85,0 black V3: Cat.7A - 1000: PE - direkte Erdverlegung / direct burial
2002442 4 X 2 X AWG 22/1 7,9 42,0 68,0 yellow V4: Cat.7e - 1200: LSZH - für feste Verlegungl / fixed installation
2002734 2 X (4 X 2 X AWG 22/1) 7,9 x 15,8 84,0 146,0 yellow V4: Cat.7e - 1200: LSZH - für feste Verlegungl / fixed installation
2003332 4 X 2 X AWG 22/1) 8,4 42,0 73,0 yellow V5: Cat.7e - 1500: LSZH - für feste Verlegungl / fixed installation
2007183 2 X (4 X 2 X AWG 23/1) 8,4 X 16,8 84,0 136,0 yellow V5: Cat.7e - 1500: LSZH - für feste Verlegungl / fixed installation